Paris Truck Company has released their TKP truck, called the. Far cry 3 uplay cd key generator. A lot of longboard truck manufacturers are making TKP (Traditional KingPin) trucks in addition to their RKP (Reverse KingPin) trucks. TKP trucks are also sometimes called CKP (Conventional KingPin) trucks. The difference between TKP and RKP trucks is that TKP trucks have the kingpin mounted fairly upright, with angles of, for example 15° from vertical (= 75° from horizontal), while RKP trucks have the kingpin mounted at more of a slant, with angles of, for example, 50° from vertical (= 40° from horizontal). Paris Street Truck 169 I picked up a set of Paris Street Trucks in the 169 size. Vital measurements: Hanger width: 169 mm (6.65') Axle length: 236 mm (9.29') Weight: 443 grams Height: 57 mm (2.24') Axle Placement: 35.5 mm (1.40') Bushing heights: 12.5 mm boardside, 13 mm roadside Bushing+washer heights: 15 mm boardside, 15 mm roadside Paris Truck Company released the measurements of their trucks in advance of their truck's release date. In addition to the measurement listings, they said it was 'a true 169 mm hanger'; my measurements confirm that statement.

Summary independent-forged-hollow-stg-11-tkp-169mm. Www.tkpgallery.com TKP Gallery's September 2009 opening featuring: Thomas Buildmore Morgan Thomas Hamid Artke Holloman Don Scott Sleaz is kooler than you Ibn Anderson Bariq Cobbs Ozlo The Kandy.

The axle width of 236 mm (9.29') is a good fit for my 9.5'ish boards. My big popsicle decks with wheelwells do well with these trucks when I ride them riserless with 57-58 mm wheels. My hybrid deck, a 10x38 shaped board that admittedly skates better with RKP trucks, doesn't have wheelwells, and I get wheelbite with 57-58 mm wheels. The trucks have a tiny sticker on the bottom that says 'Made in Taiwan'. The kingpin is the new Paris grade 8 kingpin, which Paris says is stronger than their old kingpins.

Paris has their logo on the head of their new kingpin (see the pictures below), while their old kingpins have no such logo. The shape of the metal around the kingpin seat is square, but too wide to mount inverted kingpins or non-knurled hex head kingpins.

See the captions in the pictures below for more about the kingpin. Compared to most street trucks, the baseplates are extra tall, allowing for the while achieving the height to ride 57 or 58 mm wheels without risers. 60 mm wheels if you ride tight trucks. My favorite truck setup is to ride low trucks (like around 48-50 mm in height) with risers underneath. It started about 3 years ago with Venture Lows and 1/8' risers. Nowadays, on my trick boards, I ride 3/8' risers with 48 mm high trucks - either Mini Logo or Polar Bears.

With these Paris Street Trucks, I won't need any risers at all. The kingpin, while it clears the hanger on perfectly squared up 50-50 grinds, is 57 mm (2.25') long (other street trucks typically have 50 mm (2') kingpins). Kingpin clearance is approximately 1 mm; a board with rocker or a board flexing from the weight of a skater will likely easily close this distance, causing the kingpin to grind.